Ha, they fit!

They fit.

A real Left Aux Console was measured with a caliper and a few other hand tools and 3D modeled, years ago. This year, I acquired the real landing gear module.

I didn't even know what those 3 holes were for... but I modeled them anyway. And today, I finally 3D printed it (with some extra excessive stiffening I am regretting now). Now, I know what those 3 holes are for. And they fit perfectly.

I think I will just use the real landing gear module, and the real landing gear panel. Simply because I can. ;-)

 



Comments

Post a Comment

Popular posts from this blog

F-16 blk 50 Central Pedestal

Image
 I added a chopped off blk 50 central pedestal. This is a chopped off central pedestal. The 3D model came from the "ancient" Hempstick site, as one of the forum goers stated. This is a VR pit. I call it an Augmented VR pit (AVRPit). The panels are only there to provide positions and rigidity for knobs, switches and buttons. They don't even need to look good. But because I could, I will make them look good. I won't even bother putting in instruments like HSI etc. The visuals are provided by the VR goggle. All I need is the HDG, and Heading knobs, the barometric knob, and the fuel selection knobs, etc. I will just leave the holes uncovered... empty. Maybe I will put some color pictures in them so they don't look funny. Nevertheless, this pit is designed to be adjustable, and could be torn down, and reconfigured for PS5 Gran Turismo, and regular PC gaming with keyboard/mouse. I have the other two panels instead of the F-16 front panel too. The front panel could be qu...
Read more

F-16 ICP Mechanical Design Fully Prototyped!

Image
The ICP's mechanical design is now fully prototyped. That is...  Everything you see in the picture is 3D modeled, 3D printed... Hot off the press, just file off the flashing/support materials... and assemble. No lengthy filing required. All the graphics is turned off when exporting... so 3D printed without graphics. Then, laser engraved. It's possible that you can use resin printers and print with the graphics with good result, but I am testing the worse case scenario, printing with filament printers. All buttons are backed with 0.9kgf stainless dome switches, resulting in very satisfying click, just like the real thing. The Dobber is backed with an off-the-shelf 5-way "joystick" I found and shared on ViperPits before. I am too lazy to do optical on this one... no need anyway. The toggle switches are commercial grade miniature toggles... not the Mil spec. one that costs USD $180 apiece. It's not cheap, about USD $10 apiece + S/H + tax. Not easy to find... and very...
Read more

F-16 (and other modern jets) Two-stage Trigger

Image
After weeks of struggling with the two stage trigger mechanism, I finally got it working! This is a difficult one. The difficulty lies in making it work consistently with durability. The former is made even more difficult by my desire of using all 3D printed parts, and eventually, I had to use some metal parts made with a mini-lathe. I imagine that you could use drill press with a good file to make this stuff, but it would require a lot of skills and patience. If you had that skill, you most likely has a lathe anyway. The one stage is easy. It's just the tolerance and nozzle diameter need to be considered and tested. And if you are willing to pay through the nose, you can buy springs at highly marked up prices for small quantity at Lee Springs online. It's not that I have a problem with high markup prices Lee's charges. It's a common practice to charge more for small quantity, as selling a small quantity order costs pretty much the same as a large quantity order, yet it...
Read more